Battle Brush Studios: Review: Warlord Games T-34/85

Battle Brush Studios: Review: Warlord Games T-34/85:

Review: Warlord Games T-34/85

Just over a year ago Warlord Games added the Soviet T-34/85 to their
small range of plastic 28mm World War Two vehicles. This tank kit is
what I take a closer look at today.









The T-34 surely was the most influential tank of the war. When the first
version of the vehicle showed up at the Eastern front in 1941 it was a
complete shock to the German army and proved to be superior to any
German tank of the time. Only when the Panzer IV's later versions and
the Panther came along the German army again had tanks to match the
T-34.

It struck the sweet spot between mobility, strength of armour and a
powerful main gun. Add to this simplicity of design for easy mass
production and comparatively minimal crew training and you got one of
the finest pieces of engineering in military history. Of course the
simplicity part also came with downsides. The optics were never up to
snuff with the German quality, the crew compartments were rather uncosy
even by tank standards of the time and early versions of the tank
suffered from not being equipped with radio sets and only a crew of
four.

In 1944 the T-34/85 was introduced. It carried a significantly larger
turret with enough room for the much more powerful 85mm ZiS-S-52 gun, a
third crewman and a radio set in the turret. All whilst the hull design
didn't have to be changed a great deal, frontal armour was doubled and
the speed was kept at the same level. On top of that the cost of
producing the T-34 tank was almost halved over the course of the war.



The armour still was not quite as thick as the Panther's or the Tiger's
and the gun was not quite as powerful or accurate. The fact that the
Soviet war machine pumped out 54,600 T-34 tanks, 19,430 of which were
T-34/85, more than made up for these shortcomings. This is more than
twice the total number of battle tanks produced by Germany between 1939
and 1945.



After the war the T-34/85 was the backbone of Soviet tank forces up
until the 1960s. In the wars in Jugoslavia in the 1990s both sides were
reported to use T-34/85.



So much for the history and now on to the review.

The design of the box is consistent with previous releases. It shows a
photo of the model and some scenery with some heavy tinting and
photoshop effects going on. In the background we can see some Warlord
Games Soviet infantry and I think some Warlord Games plastic terrain.

The back of the box has the usual fluff text and two pictures of
different models built and painted. This is a nice touch, just showing
some variants. As always, the painter is credited too and there is a
reminder that there are waterslide transfers in the box as well (unlike
in their resin/metal vehicle sets).



The box isn't shrink-wrapped in any way, neither are the sprues.

You get two sprues in the box. We can already see that the wheels are
all a one part cast, the tracks interestingly are a two part cast,
meeting at the front and back of the tracks.

The top of the hull is a one-piece cast. Looking at the sprues though I
spotted an optional tank commander to put on the top hatch. This
continues a rather interesting trend with Warlord Games and their tank
models, a think I noticed about the Panzer IV Ausf.H as well: Including a
tank commander but not telling anybody about it. Neither the
description on the website nor the box itself say anything about a tank
commander being included.

Not to say it's a nice surprise but if I had ordered seperate tank
commanders and then realized there was one in the set already - like I
did with the Panzer IV - I would be slightly miffed.

The whole kit is about 29 pieces so the building instructions are almost
more of a bit of decoration rather than required. A nice addition to
the model is the option to replace the hull MG with a flame thrower
(which would make it an OT-34/85 I guess?)

..with faintly visible white numbers and mottos.

The decal sheet is really nicely done. It has the full selection of
numbers in white, a few in red, a bunch of red stars and extra decals
for guards units. It also has the mandatory mottos in cyrillic script
along with tiny translations. Very nice touch. Usually you get the
mottos but translating them is left to you.

The first thing I did was looking up ways for how to make the hull look
nicer, add more detail and such, looking for staples to make handles,
trying to remember where I put the ultra thin wire to twist together
some towing cables and such. Taking a closer look at the top hull piece
though made me realize that none of that was required. The detailling on
the hull is rather nice for a wargaming plastic model.

In the picture you can also see that the turret isn't kept in place by
the old bayonet-twist mechanism like on scale models but just by a hole.
You get a piece for fixing the turret in place but still be able to
turn it around. I decided to just keep the turret removable for ease of
painting (painting tanks with the turret on is a pain in the rear)
transportation and for spectacular tank kills.

The handles look fine from top and the sides but the medium is plastic
after all so the lower parts would be undercuts which plastic doesn't
like. If you want to go for the full proper look just file the undercut
material off and you're good. I decided to just keep it as it is.

What I don't like about the hull surface is the lack of weldseams which
of course would be rather prominent on a T-34. Lateron I added some via
plastic cement and a hobby knife.

Assembly is a breeze on this one. I left the wheel parts and tracks off
for now for easlier painting. The fit of the parts is excellent. I still
used some rubber bands on the hull and turret to keep the single parts
neatly together whilst the glue cures but that was more out of habit
than necessity. This kit doesn't allow for the cannon to be elevated or
lowered once it's put together. The way the pieces are made look like
with some converting and a metal rod you could make it movable if you so
wish.

Here's the bad boy all finished:

I put quite a lot of time into the weathering and whatnot. "Proper"
scale modelling is quite fascinating to me. Not only because it was the
first modelling I did but also because the techniques used are so
different to all the Fantasy/Sci-Fi characters painting I usually do. In
recent years there's been a MASSIVE influx of know-how from scale
modelling into sci-fi/fantasy/wargaming of course. Some work, others
don't I think. With wargaming figures you have to slightly shift the
focus to sturdiness and "what will it look like on a table that's less
well lit than my showcase cabinet or my painting table?" as well as
proper realistic looks.

As I mentioned above I added some weldseams and I subjected the turret
to quite some abuse to get it to have a very rough cast iron texture.
the moulds used in Soviet factories were of less refined quality than
say the moulds US foundries used because there were a few million axis
forces running around in their country, wrecking their stuff. Despite
the nice decals sheet I decided to paint on the markings and slogans by
hand because it would look more proper on a Soviet tank. Speaking of
proper things - I replaced the antenna with a piece of wire. The antenna
you get in the box is reminiscent of the antennae you get in many
plastic kits designed for wargaming so it's just way too short.

I considered doing the old white stripe or cross on the turret but those
were only really used for a very short timespan in and around the
battle for Berlin so I opted for dropping that idea. Weathering tanks is
fun enough.

Overall the T-34/85 plastic kit by Warlord Games leaves nothing to ask
for for the regular wargamer. I wonder if it would have taken much
effort to include a third sprue with a T-34/76 turret so you could field
both versions with just getting one box. The quality of the kit is fine
and nobody will have any trouble putting it together. The size of the
model is spot on in terms of length and width, although it seems to be a
few millimeters too tall.

With a price tag of GBP 18.00 this one is right along the lines of
Warlord Games' pricing. It's not cheap but then again - "who else does
that in 28mm plastic?" (no, 1/48th scale does NOT qualify as fitting
with 28mm figures. You know who you are. ;-) ). If you want to get your
platoon some support or need your tank riders something to ride on you
can barely go wrong with this kit. It's nothing fancy but you get a very
solid kit with nice detailling (for a wargaming model), a commander and
a hull flamer option.

I hope that you enjoyed this review, found it interesting,
entertaining and so on. If you have any questions, comments or indeed
commission enquiries, feel free to let me know via the comments section,
the Battle Brush Studios Facebook page or via e-mail.